Sensitive Denture Adhesive
This Adhesive is the world‘s only non-water-soluble Denture Adhesive. Sensitive gums can lead to pressure points and irritations with dentures. fittydent Denture Adhesive Sensitive, with its natural soothing effects of Aloe Vera and Myrrh, alleviates discomfort in the oral mucosa and prevents it. This soothing effect is particularly effective due to the extended contact duration with the mucous membrane. fittydent Denture Adhesive Sensitive is also well-suited for beginners, especially in the initial stages where sore spots may occur while the jaw adjusts to the denture.
upper denture
lower denture
partial denture
Sensitive Denture Adhesive
This Adhesive is the world‘s only non-water-soluble Denture Adhesive. Sensitive gums can lead to pressure points and irritations with dentures. fittydent Denture Adhesive Sensitive, with its natural soothing effects of Aloe Vera and Myrrh, alleviates discomfort in the oral mucosa and prevents it. This soothing effect is particularly effective due to the extended contact duration with the mucous membrane. fittydent Denture Adhesive Sensitive is also well-suited for beginners, especially in the initial stages where sore spots may occur while the jaw adjusts to the denture.
upper denture
lower denture
partial denture
Brand Names |
 |
 |
 |
Available |
International | Nordic Countries/Italy | USA / GB |
Manufacturer |
Fittydent International, Vienna – Austria |
Suitable for |
Upper, lower and partial Dentures |
Benefits |
Waterproof, free of zinc, free of gluten, vegan, no animal testing – PETA certified |
Bonding Duration |
Up to 12 hours |
Applied Quantity |
Less is more! Less Adhesive is more Bonding. You can achieve good results in spreading the Adhesive with a wet finger in a thin layer. Too much Adhesive can sometime result in a white milky kind of film if not cleaned properly. |
Side effects |
No incidents so far. However, in case of intolerance/hypersensitivity against one of the ingredients please stop using. Swallowing the Denture Adhesive is harmless. In the unlikely event that a serious problem develops after use, contact your doctor. Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the competent authority. |
Increase or Decrease in Bonding Duration |
Denture wearers with minimal oral mucosa could experience an extended bonding duration. Excessive salivation could affect the product performance = shorter bonding. If you have an extreme flat and narrow lower jaw, we would recommend the fittydent Denture Adhesive Cushions. Specially made for x-treme flat jaws. |
Removal |
The bonding become less at the end of the day and you can remove the dentures easily. |
Emergency Removal |
If the denture has to be removed prematurely, it is sufficient if you pull down or up on the back side. The denture then detaches from back to front. Same procedure, if the bonding is still strong at the end of the day and you are worried about sleeping with your dentures. Apply less Adhesive next time. |
Cleaning |
For possible non-water-soluble Adhesive residues on the dentures, we recommend the fittydent Cleansing Tablets. Milky colored build-up on your dentures can be a sign of too much Adhesive or infrequent cleaning. Next time use less Adhesive if possible and clean more often also for hygienic reasons. Smaller residues of the Adhesive on dentures, jaw or palate can also be removed easily with a small amount of cooking oil on a cotton cloth. |
Caution |
Do not use fittydent Denture Adhesive with other adhesive products. Do not use on dentures with soft lining. Consult your dentist regularly to check the fit of your dentures. Keep out of reach of children. Tube opening is technically necessary. Disposal of packaging, product packaging and insert according to local regulation and according to recycling symbol. |
Storage |
Store dry at room temperature! |
Instruction |
Apply the Denture Adhesive in thin strips (see icons) on the clean and dry contact surface of the dentures. Less is more! Less Adhesive is more bonding. If you have difficulties in finding the right dosage, you are welcome to spread the Denture Adhesive very thinly with a damp finger at the beginning. On dry surface the application is easier to handle. Insert the dentures on jaw and/or palate, press on and bite firmly. If possible, wait 15 minutes before eating or drinking. Close tube tightly after use. |
Tingling Sensation |
In rare cases (or a sensitive gum) a short tingling burning sensation can occur, caused by the alcohol in the Adhesive. If so, we recommend to expand the time before inserting for at least half a minute, to give the alcohol time to evaporate. |
Ingredients |
Polyvinylacetate, Sodium Carboxymethylcellulose, Alcohol, Triacetin, Paraffinum Liquidum, Silica, Aloe Vera Gel, Tinctura Myrrhae |
Brand Names
International
Nordic Countries/ Italy
USA/ GB
Manufacturer
Fittydent International, Vienna – Austria
Suitable for
Upper, lower and partial Dentures
Benefits
Waterproof, free of zinc, free of gluten, vegan, no animal testing – PETA certified
Bonding Duration
Up to 12 hours
Applied Quantity
Less is more! Less Adhesive is more Bonding. You can achieve good results in spreading the Adhesive with a wet finger in a thin layer. Too much Adhesive can sometime result in a white milky kind of film if not cleaned properly.
Side effects
No incidents so far.
However, in case of intolerance/hypersensitivity against one of the ingredients please stop using. Swallowing the Denture Adhesive is harmless. In the unlikely event that a serious problem develops after use, contact your doctor. Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the competent authority.
Increase or Decrease
in Bonding Duration
Denture wearers with minimal oral mucosa could experience an extended bonding duration. Excessive salivation could affect the product performance = shorter bonding. If you have an extreme flat and narrow lower jaw, we would recommend the Adhesive cushions. Specially made for x-treme flat jaws.
Removal
The bonding become less at the end of the day and you can remove the dentures easily.
Emergency Removal
If the denture has to be removed prematurely, it is sufficient if you pull up on the back side. The denture then detaches from back to front. Same procedure, if the bonding is still strong at the end of the day and you are worried about sleeping with your dentures. Apply less Adhesive next time.
Cleaning
For possible non-water-soluble Adhesive residues on the dentures, we recommend the fittydent Cleansing Tablets. Milky colored build-up on your dentures can be a sign of too much Adhesive or infrequent cleaning. Next time use less Adhesive if possible and clean more often also for hygienic reasons. Smaller residues of the Adhesive on dentures, jaw or palate can also be removed easily with a small amount of cooking oil on a cotton cloth.
Caution
Do not use Fittydent Denture Adhesive with other adhesive products. Do not use on dentures with soft lining. Consult your dentist regularly to check the fit of your dentures. Keep out of reach of children. Tube opening is technically necessary. Disposal of packaging, product packaging and insert according to local regulation and according to recycling symbol.
Storage
Store dry at room temperature!
Instruction
Apply the Denture Adhesive in thin strips (see icons) on the clean and dry contact surface of the dentures. Less is more! Less Adhesive is more bonding. If you have difficulties in finding the right dosage, you are welcome to spread the Denture Adhesive very thinly with a damp finger at the beginning. On dry surface the application is easier to handle. Insert the dentures on jaw and/or palate, press on and bite firmly. If possible, wait 15 minutes before eating or drinking. Close tube tightly after use.
Tingling Sensation
In rare cases (or a sensitive gum) a short tingling burning sensation can occur, caused by the alcohol in the Adhesive. If so, we recommend to expand the time before inserting for at least half a minute, to give the alcohol time to evaporate.
Ingredients
Polyvinylacetate, Sodium Carboxymethylcellulose, Alcohol, Triacetin, Paraffinum Liquidum, Silica, Aloe Vera Gel, Tinctura Myrrhae
